Grid-Tie Solar Inverters
Explore Grid-Tie Solar Inverters
Explore battery-free PV inverter platforms. Check the model operating modes, CT arrangement and local connection requirements before designing the installation.
Compare the platforms below, then open the relevant series for the model table and configuration checklist. Techfine Group can help clarify the model and supply requirements for your enquiry.
Parameter | HG6500 | HG11000
Input wiring | L+N+PE
Battery-free pure photovoltaic inverter, eliminating the need for energy storage battery packs, lower costs.
Support CT anti-backflow function, automatically detect the grid status, and ensure that no power is reversed to the grid.
Applications and Selection
Electrical Configuration
Use the Grid-Tie Solar Inverters electrical limits as the starting point for system design. Confirm the AC supply where applicable, battery voltage, PV string limits and equipment connected to the output. Optional functions must be specified with the order.
Installation Conditions
Check the battery and charging requirements for the selected Grid-Tie Solar Inverters model. Match permitted charge and discharge current, charging profile and any supported BMS protocol. A matching connector or nominal voltage alone does not confirm compatibility. For a battery-free or DC-only product, use only the interfaces listed in its model table.
Operating Requirements
Install the Grid-Tie Solar Inverters product within the temperature, ventilation and enclosure conditions stated in its manual. Specify cable sizes, isolation and protection through a qualified installation design. Product dimensions and clearances should be checked before cabinet or mounting work.
Check which monitoring ports and communication options are included on the selected Grid-Tie Solar Inverters model. Confirm accessory hardware, protocol and firmware before relying on remote monitoring, battery communication or expansion.
Applications and Selection
Frequently Asked Questions
Explore battery-free PV inverter platforms. Check the model operating modes, CT arrangement and local connection requirements before designing the installation. Compare the exact model specifications and the interfaces needed by your system.
No. Accessories, firmware functions and supported expansion depend on the exact model and agreed supply configuration.
Use the enclosure rating, temperature limits and installation instructions for the selected model. Do not assume every product in a category has the same protection rating.
Request the matching model data sheet and manual. Where market compliance evidence is needed, confirm that it covers the exact model and configuration.
Provide the model or application, electrical requirements, destination market, quantity and any branding or packaging requirements.
Confirm expansion support before ordering. Compatibility depends on the equipment, firmware, wiring and battery arrangement; a similar series name alone is not sufficient.
