Off-Grid Solar Inverters
Explore Off-Grid Solar Inverters
Compare transformer-based inverter and charger platforms for independent power and backup applications. Select for continuous load, starting requirements and battery voltage.
Compare the platforms below, then open the relevant series for the model table and configuration checklist. Techfine Group can help clarify the model and supply requirements for your enquiry.
Parameter | VS-U 1012/24 | VS-U 1312/24 | VS-U 1512/24 | VS-U 2012/24/48 | VS-U 2512/24/48 | VS-U 3024/48 | VS-U 3824/48 | VS-U 5024/48 | VS-U 6324/48 | VS-U 8048 | VS-U 10048 | VS-U 12548
AC (grid) input | Single-phase 230 VAC; single-phase 110 VAC; split-phase 230 V + 115 V (two-live-wire grid)
Parameter | VS-Parallel 6348 | VS-Parallel 12548
Power input | 230 VAC (standard)
Parameter | JV3824/3848 | JV5024/5048 | JV6324/6348
Power input | 220 VAC (standard) / 110 VAC (custom)
Parameter | HB0512 | HB0812 | HB1012 | HB1512 | HB1524 | HB2024 | HB2524 | HB3024 | HB3048 | HB5024 | HB5048 | HB6048 | HB8048 | HB10048
Power input | 220 VAC (standard) / 110 VAC (custom)
Parameter | ME0512 | ME0812 | ME1012/24 | ME1312/24 | ME1512/24 | ME2012/24/48 | ME2524/48 | ME3024/48 | ME3824/48 | ME5024/48
Power input | 220 VAC (standard) / 110 VAC (custom)
Applications and Selection
Electrical Configuration
Use the Off-Grid Solar Inverters electrical limits as the starting point for system design. Confirm the AC supply where applicable, battery voltage, PV string limits and equipment connected to the output. Optional functions must be specified with the order.
Installation Conditions
Check the battery and charging requirements for the selected Off-Grid Solar Inverters model. Match permitted charge and discharge current, charging profile and any supported BMS protocol. A matching connector or nominal voltage alone does not confirm compatibility. For a battery-free or DC-only product, use only the interfaces listed in its model table.
Operating Requirements
Install the Off-Grid Solar Inverters product within the temperature, ventilation and enclosure conditions stated in its manual. Specify cable sizes, isolation and protection through a qualified installation design. Product dimensions and clearances should be checked before cabinet or mounting work.
Check which monitoring ports and communication options are included on the selected Off-Grid Solar Inverters model. Confirm accessory hardware, protocol and firmware before relying on remote monitoring, battery communication or expansion.
Applications and Selection
Frequently Asked Questions
Compare transformer-based inverter and charger platforms for independent power and backup applications. Select for continuous load, starting requirements and battery voltage. Compare the exact model specifications and the interfaces needed by your system.
No. Accessories, firmware functions and supported expansion depend on the exact model and agreed supply configuration.
Use the enclosure rating, temperature limits and installation instructions for the selected model. Do not assume every product in a category has the same protection rating.
Request the matching model data sheet and manual. Where market compliance evidence is needed, confirm that it covers the exact model and configuration.
Provide the model or application, electrical requirements, destination market, quantity and any branding or packaging requirements.
Confirm expansion support before ordering. Compatibility depends on the equipment, firmware, wiring and battery arrangement; a similar series name alone is not sufficient.
