YA Series Hybrid Solar Inverter
YA Series Hybrid Solar Inverter 6.2 kW
Parameter | YA6248MH
Input formation | L+N+PE
Rated input voltage | 220/230/240 VAC
The YA series belongs to the hybrid solar inverters range. Review the exact model in the specification table rather than selecting on the series name alone.
Parameter | YA6248MH Input formation | L+N+PE
Structural Features
Key features of the YA platform:
- Parameter | YA6248MH
- Input formation | L+N+PE
- Rated input voltage | 220/230/240 VAC
- Input voltage range | 90-280 VAC ±3 V (normal mode); 170-280 VAC ±3 V (UPS mode)
- Input frequency | 50/60 Hz ±5%
Product Advantages
Parameter | YA6248MH
Input formation | L+N+PE
Rated input voltage | 220/230/240 VAC
Input voltage range | 90-280 VAC ±3 V (normal mode); 170-280 VAC ±3 V (UPS mode)
Input frequency | 50/60 Hz ±5%
For a YA quotation, send the exact model, quantity, destination market, electrical requirements and expected operating duty. Identify any branding, packaging or documentation requirements separately so the supplied configuration is clear.
Technical Parameters
| Parameter | YA6248MH |
|---|---|
| AC input | |
| Input formation | L+N+PE |
| Rated input voltage | 220/230/240 VAC |
| Input voltage range | 90-280 VAC ±3 V (normal mode); 170-280 VAC ±3 V (UPS mode) |
| Input frequency | 50/60 Hz ±5% |
| Output | |
| Rated power (battery inverter) | 6200 W |
| PV inverter output power | 6200 W |
| Output voltage | 220/230/240 VAC ±5% |
| Output frequency | 50/60 Hz ±0.1% |
| Output waveform | Pure sine wave |
| Transfer time | ≤10 ms (UPS mode); ≤20 ms (INV mode) |
| Peak power | 12400 VA |
| Overload capability | Battery mode: 11 s @105-150% load; 2 s @150-200% load; 400 ms @>200% load |
| Grid-tie operation | |
| Output voltage | 220/230/240 VAC |
| Grid feed-in voltage range | 100-280 VAC |
| Grid feed-in frequency range | 47-53 Hz ±1 Hz / 57-62 Hz ±1 Hz |
| Rated output current | 26.9 A |
| Power factor range | >0.99 |
| Battery | |
| Peak efficiency (DC/AC) | 98% |
| Rated voltage | 48 Vdc |
| Constant charge voltage (adjustable) | 56.4 Vdc |
| Float charge voltage (adjustable) | 54 Vdc |
| Charger | |
| PV charging mode | MPPT |
| Max. PV input power | 8500 W |
| MPPT input voltage range | 60-500 Vdc |
| Optimal Vmp range | 360-430 Vdc |
| Max. PV input voltage | 500 Vdc |
| Max. PV input current | 27 A |
| Max. PV charging current | 120 A |
| Max. AC charging current | 100 A |
| Max. charging current | 120 A |
| Interface | |
| RS232 | Baud rate 2400 |
| Expansion slot communication port | Li-battery BMS communication card, WiFi card, dry-contact card, etc. |
| Parallel operation | Not supported |
| Environment | |
| Operating temperature | -10 to 50 °C |
| Storage temperature | -15 to 60 °C |
| Operating humidity | 20-90% (non-condensing) |
| Noise level | ≤50 dB |
Use the YA electrical limits as the starting point for system design. Confirm the AC supply where applicable, battery voltage, PV string limits and equipment connected to the output. Optional functions must be specified with the order.
Check the battery and charging requirements for the selected YA model. Match permitted charge and discharge current, charging profile and any supported BMS protocol. A matching connector or nominal voltage alone does not confirm compatibility. For a battery-free or DC-only product, use only the interfaces listed in its model table.
For a YA quotation, send the exact model, quantity, destination market, electrical requirements and expected operating duty. Identify any branding, packaging or documentation requirements separately so the supplied configuration is clear.
The table describes one published model revision. Confirm the current supply configuration before ordering.
Before You Order
Use the YA electrical limits as the starting point for system design. Confirm the AC supply where applicable, battery voltage, PV string limits and equipment connected to the output. Optional functions must be specified with the order.
Electrical Match
Check the battery and charging requirements for the selected YA model. Match permitted charge and discharge current, charging profile and any supported BMS protocol. A matching connector or nominal voltage alone does not confirm compatibility. For a battery-free or DC-only product, use only the interfaces listed in its model table.
Installation Plan
Install the YA product within the temperature, ventilation and enclosure conditions stated in its manual. Specify cable sizes, isolation and protection through a qualified installation design. Product dimensions and clearances should be checked before cabinet or mounting work.
Supply Configuration
YA Series — Selection and Application
The YA series belongs to the hybrid solar inverters range. Review the exact model in the specification table rather than selecting on the series name alone.
Parameter | YA6248MH Input formation | L+N+PE
Model selection
For YA, first identify the required electrical interface and continuous load.
Parameter | YA6248MH Input formation | L+N+PE
Operating features
Parameter | YA6248MH
Input formation | L+N+PE
Rated input voltage | 220/230/240 VAC
Input voltage range | 90-280 VAC ±3 V (normal mode); 170-280 VAC ±3 V (UPS mode)
Input frequency | 50/60 Hz ±5%
System integration
Use the YA electrical limits as the starting point for system design. Confirm the AC supply where applicable, battery voltage, PV string limits and equipment connected to the output. Optional functions must be specified with the order.
Battery and charging
Check the battery and charging requirements for the selected YA model. Match permitted charge and discharge current, charging profile and any supported BMS protocol. A matching connector or nominal voltage alone does not confirm compatibility. For a battery-free or DC-only product, use only the interfaces listed in its model table.
Installation planning
Install the YA product within the temperature, ventilation and enclosure conditions stated in its manual. Specify cable sizes, isolation and protection through a qualified installation design. Product dimensions and clearances should be checked before cabinet or mounting work.
Monitoring and interfaces
Check which monitoring ports and communication options are included on the selected YA model. Confirm accessory hardware, protocol and firmware before relying on remote monitoring, battery communication or expansion.
Frequently asked questions
Which YA model should I choose? Start with the model table and the loads or battery system, then confirm the final configuration before ordering.
Are all optional functions included? No. Availability depends on the model, hardware and agreed supply specification.
Can I combine data from different catalogues? Use one matching model and revision. Confirm any differing values with the supplier.
Discuss your requirements
Contact Techfine Group with your YA requirements. Include the model and the application so the electrical configuration and supporting documents can be checked.
