MINI M Series UPS
MINI M Series DC UPS 18-60 W
Parameter | M18P | M36P | M60P
Output power | 18 W | 36 W | 60 W
Voltage range | 85-265 VAC | 100-240 VAC
The MINI M series belongs to the ups power supplies range. Review the exact model in the specification table rather than selecting on the series name alone.
Parameter | M18P | M36P | M60P Output power | 18 W | 36 W | 60 W
Structural Features
Key features of the MINI M platform:
- Parameter | M18P | M36P | M60P
- Output power | 18 W | 36 W | 60 W
- Voltage range | 85-265 VAC | 100-240 VAC
- Frequency range | 50/60 Hz | 50-60 Hz
- Surge current | ≤3 A
Product Advantages
Parameter | M18P | M36P | M60P
Output power | 18 W | 36 W | 60 W
Voltage range | 85-265 VAC | 100-240 VAC
Frequency range | 50/60 Hz | 50-60 Hz
Surge current | ≤3 A
For a MINI M quotation, send the exact model, quantity, destination market, electrical requirements and expected operating duty. Identify any branding, packaging or documentation requirements separately so the supplied configuration is clear.
Technical Parameters
| Parameter | M18P | M36P | M60P |
|---|---|---|---|
| General | |||
| Output power | 18 W | 36 W | 60 W |
| Input | |||
| Voltage range | 85-265 VAC | 100-240 VAC | |
| Frequency range | 50/60 Hz | 50-60 Hz | |
| Surge current | ≤3 A | ||
| Input fuse | 0.8 A / 250 VAC | 1 A / 250 VAC | |
| Output ports – rated current | |||
| USB 5V | 2 A | 1.5 A | |
| DC 5V | 2 A | Type-C 5V: 1.5 A | |
| DC 9V | 1 A | 2 A | 1.5 A |
| DC 12V | 1.3 A | 2 A | 5 A |
| PoE 15V | 0.6 A | 1 A | |
| PoE 24V | 0.6 A | 1 A | |
| Voltage error (all ports) | ±5% | ||
| Ripple voltage | USB/DC 5V ≤250 mVp-p; DC 9V ≤680 mVp-p; DC 12V ≤900 mVp-p; PoE 15V ≤1000 mVp-p; PoE 24V ≤1500 mVp-p | ||
| Transfer time | 0 ms | ||
| Efficiency | ≥85% | ||
| Battery | |||
| Battery specification | Conventional 2200 mAh (2600 mAh customizable) | ||
| Battery quantity | 4 | 8 | |
| Appearance | |||
| LED display | Power level display, working status display | ||
| Host dimensions L×W×H | 188×107×34 mm | 220×136×47.5 mm | |
| Net weight | 0.4 | 0.41 | 1.18 |
| Packaging (standard configuration) | |||
| Single unit dimensions | 220×164×40 mm | 315×165×65 mm | |
| Single unit gross weight | 0.58 | 1.43 | |
| One box | 430×350×220 mm, 20 pcs | 360×330×345 mm, 10 pcs | |
| Box gross weight | 11.6 | 14.3 | |
| Environment | |||
| Operating temperature | 0-45 °C, typical 25 °C (charging prohibited below 0 °C) | ||
| Storage temperature | -10-70 °C, typical 25 °C | ||
| Relative humidity | 0-85% (no condensation) | ||
| Altitude | ≤3000 m | ||
| Heat dissipation | Natural convection | ||
Use the MINI M electrical limits as the starting point for system design. Confirm the AC supply where applicable, battery voltage, PV string limits and equipment connected to the output. Optional functions must be specified with the order.
Check the battery and charging requirements for the selected MINI M model. Match permitted charge and discharge current, charging profile and any supported BMS protocol. A matching connector or nominal voltage alone does not confirm compatibility. For a battery-free or DC-only product, use only the interfaces listed in its model table.
For a MINI M quotation, send the exact model, quantity, destination market, electrical requirements and expected operating duty. Identify any branding, packaging or documentation requirements separately so the supplied configuration is clear.
The table describes one published model revision. Confirm the current supply configuration before ordering.
Before You Order
Use the MINI M electrical limits as the starting point for system design. Confirm the AC supply where applicable, battery voltage, PV string limits and equipment connected to the output. Optional functions must be specified with the order.
Electrical Match
Check the battery and charging requirements for the selected MINI M model. Match permitted charge and discharge current, charging profile and any supported BMS protocol. A matching connector or nominal voltage alone does not confirm compatibility. For a battery-free or DC-only product, use only the interfaces listed in its model table.
Installation Plan
Install the MINI M product within the temperature, ventilation and enclosure conditions stated in its manual. Specify cable sizes, isolation and protection through a qualified installation design. Product dimensions and clearances should be checked before cabinet or mounting work.
Supply Configuration
MINI M Series — Selection and Application
The MINI M series belongs to the ups power supplies range. Review the exact model in the specification table rather than selecting on the series name alone.
Parameter | M18P | M36P | M60P Output power | 18 W | 36 W | 60 W
Model selection
For MINI M, first identify the required electrical interface and continuous load.
Parameter | M18P | M36P | M60P Output power | 18 W | 36 W | 60 W
Operating features
Parameter | M18P | M36P | M60P
Output power | 18 W | 36 W | 60 W
Voltage range | 85-265 VAC | 100-240 VAC
Frequency range | 50/60 Hz | 50-60 Hz
Surge current | ≤3 A
System integration
Use the MINI M electrical limits as the starting point for system design. Confirm the AC supply where applicable, battery voltage, PV string limits and equipment connected to the output. Optional functions must be specified with the order.
Battery and charging
Check the battery and charging requirements for the selected MINI M model. Match permitted charge and discharge current, charging profile and any supported BMS protocol. A matching connector or nominal voltage alone does not confirm compatibility. For a battery-free or DC-only product, use only the interfaces listed in its model table.
Installation planning
Install the MINI M product within the temperature, ventilation and enclosure conditions stated in its manual. Specify cable sizes, isolation and protection through a qualified installation design. Product dimensions and clearances should be checked before cabinet or mounting work.
Monitoring and interfaces
Check which monitoring ports and communication options are included on the selected MINI M model. Confirm accessory hardware, protocol and firmware before relying on remote monitoring, battery communication or expansion.
Frequently asked questions
Which MINI M model should I choose? Start with the model table and the loads or battery system, then confirm the final configuration before ordering.
Are all optional functions included? No. Availability depends on the model, hardware and agreed supply specification.
Can I combine data from different catalogues? Use one matching model and revision. Confirm any differing values with the supplier.
Discuss your requirements
Contact Techfine Group with your MINI M requirements. Include the model and the application so the electrical configuration and supporting documents can be checked.
