LiFePO4 Storage Batteries
Explore LiFePO4 Storage Batteries
Compare wall-mounted, rack-mounted and low-voltage LiFePO4 battery platforms. Match energy capacity, permitted current and BMS communication to the inverter.
Compare the platforms below, then open the relevant series for the model table and configuration checklist. Techfine Group can help clarify the model and supply requirements for your enquiry.
Highly scalable system design supports parallel connection of up to 15 units, including mixed use of new and old batteries and optional lead-acid battery parallel configurations.
LiFePO₄ cells deliver ≥5000 cycles, excellent thermal stability, high discharge rate, and up to 95% depth of discharge for greater usable capacity and longer lifespan.
Compatible with multiple communication interfaces
Uses high-quality Grade A lithium cells with full capacity, each equipped with a QR code for traceability and strict quality control.
Features a low self-discharge rate, maintaining charge for up to a year without use, ready to go whenever you are.
A self-diagnostic system continuously adjusts each cell for peak performance, significantly extending the battery’s lifespan and reliability.
Applications and Selection
Electrical Configuration
Use the LiFePO4 Storage Batteries electrical limits as the starting point for system design. Confirm the AC supply where applicable, battery voltage, PV string limits and equipment connected to the output. Optional functions must be specified with the order.
Installation Conditions
Check the battery and charging requirements for the selected LiFePO4 Storage Batteries model. Match permitted charge and discharge current, charging profile and any supported BMS protocol. A matching connector or nominal voltage alone does not confirm compatibility. For a battery-free or DC-only product, use only the interfaces listed in its model table.
Operating Requirements
Install the LiFePO4 Storage Batteries product within the temperature, ventilation and enclosure conditions stated in its manual. Specify cable sizes, isolation and protection through a qualified installation design. Product dimensions and clearances should be checked before cabinet or mounting work.
Check which monitoring ports and communication options are included on the selected LiFePO4 Storage Batteries model. Confirm accessory hardware, protocol and firmware before relying on remote monitoring, battery communication or expansion.
Applications and Selection
Frequently Asked Questions
Compare wall-mounted, rack-mounted and low-voltage LiFePO4 battery platforms. Match energy capacity, permitted current and BMS communication to the inverter. Compare the exact model specifications and the interfaces needed by your system.
No. Accessories, firmware functions and supported expansion depend on the exact model and agreed supply configuration.
Use the enclosure rating, temperature limits and installation instructions for the selected model. Do not assume every product in a category has the same protection rating.
Request the matching model data sheet and manual. Where market compliance evidence is needed, confirm that it covers the exact model and configuration.
Provide the model or application, electrical requirements, destination market, quantity and any branding or packaging requirements.
Confirm expansion support before ordering. Compatibility depends on the equipment, firmware, wiring and battery arrangement; a similar series name alone is not sufficient.
