GA PRO PLUS Series Hybrid Solar Inverter
GA Pro Plus-series — 6.2kW–11kW
Lithium Battery Auto-restart Function, More Convenient for Lithium Battery Charging
Intelligent Power Supply Mode, Intelligent Distribution of Solar Panel/Mains/Battery Power Shares
Utility Charging Voltage/PV Charging Voltage Adjustable, Match Different Battery Charging Requirements
The GA PRO PLUS series belongs to the hybrid solar inverters range. Review the exact model in the specification table rather than selecting on the series name alone.
Lithium Battery Auto-restart Function, More Convenient for Lithium Battery Charging Intelligent Power Supply Mode, Intelligent Distribution of Solar Panel/Mains/Battery Power Shares
Structural Features
Key features of the GA PRO PLUS platform:
- Lithium Battery Auto-restart Function, More Convenient for Lithium Battery Charging
- Intelligent Power Supply Mode, Intelligent Distribution of Solar Panel/Mains/Battery Power Shares
- Utility Charging Voltage/PV Charging Voltage Adjustable, Match Different Battery Charging Requirements
- Slim Body, Convenient Installation And Transportation
- Battery Reverse Connection Protection with Fuse Switch, Safer Installation
- PF1.0, High Efficiency, Lower Consumption, Energy Conservation/Environmental Protection/Electricity Saving/Cost Saving
Product Advantages
Lithium Battery Auto-restart Function, More Convenient for Lithium Battery Charging
Intelligent Power Supply Mode, Intelligent Distribution of Solar Panel/Mains/Battery Power Shares
Utility Charging Voltage/PV Charging Voltage Adjustable, Match Different Battery Charging Requirements
Slim Body, Convenient Installation And Transportation
Battery Reverse Connection Protection with Fuse Switch, Safer Installation
PF1.0, High Efficiency, Lower Consumption, Energy Conservation/Environmental Protection/Electricity Saving/Cost Saving
Technical Parameters
| Model | GA6248SMHB | GA8648SMHB | GA11048SMHB |
|---|---|---|---|
| AC Input | |||
| Nominal Voltage | 220/230/240VAC | ||
| Voltage Range | 90-280VAC±3V(Inverter Mode) 170-280VAC±3V(UPS Mode) | ||
| Frequency | 50-60Hz Auto sensing | ||
| Inverter Output | |||
| Rated Output Power | 6200W | 8600W | 11000W |
| Output Voltage(AC) | 220/230/240VAC±5% | ||
| Output Frequency | 50/60Hz±0.1% | ||
| Waveform | Pure sine wave | ||
| Transfer time(AC to DC) | 10ms for Computer Equipment, 20ms for Household Equipment | ||
| Peak Power | 12400VA | 16000VA | 22000VA |
| Overload Capacity(Battery Mode) | Battery Mode: 11s@105%~150% Load; 2s@150%~200% Load; 400ms@>200% Load | ||
| Grid connected Operation | |||
| Output Voltage | 220/230/240VAC | ||
| Grid Voltage Range | 195-253VA | ||
| Grid Frequency Range | 49-51±1Hz/59-61±1Hz | ||
| Output Current | 26.9A | 34.7A | 47.8A |
| Power Factor Range | >0.99 | ||
| Max efficiency (DC/AC) | 0.98 | ||
| Battery Charging | |||
| Norminal Voltage | 48VDC | ||
| Constant Charging Voltage | 56.4VDC | ||
| Float Charging Voltage | 54VDC | ||
| PV Input & Charging | |||
| PV Charging Way | MPPT | 2*MPPT | |
| Max PV Input Power | 8500W | 2*6500W | 2*7500W |
| MPPT Controller Voltage | 60-500VDC | 90-500VDC | |
| MAX PV Input Voltage | 500VDC | ||
| MAX PV Charge Current | 120A | 150A | 150A |
| MAX AC Charge Current | 100A | 120A | 150A |
| MAX Charge Current | 120A | 150A | 150A |
| Communication & Display | |||
| LCD Display | AC input Voltage,AC input frequency,PV Voltage,PV Current,Output Voltage, Output Frequency, Battery Voltage,Load Current,etc. | ||
| RS232 | 5PIN/Pitch2.0mm | ||
| Expansion Slot Communication Interface | 2×5PIN/Pitch2.54mm,Lithium battery BMS communication card,WIFI, etc | ||
| Parallel Interface | Yes:Max 9 parallel machines | ||
| Environmental Conditions | |||
| Operating Temperature | -10~50°C | ||
| Humidity | 20%~95%(Non-condensing) | ||
| Storage Temperature | -15~60°C | ||
| Altitude | <1000m | ||
| Noise(dB) | ≤50db | ||
Use the GA PRO PLUS electrical limits as the starting point for system design. Confirm the AC supply where applicable, battery voltage, PV string limits and equipment connected to the output. Optional functions must be specified with the order.
Check the battery and charging requirements for the selected GA PRO PLUS model. Match permitted charge and discharge current, charging profile and any supported BMS protocol. A matching connector or nominal voltage alone does not confirm compatibility. For a battery-free or DC-only product, use only the interfaces listed in its model table.
For a GA PRO PLUS quotation, send the exact model, quantity, destination market, electrical requirements and expected operating duty. Identify any branding, packaging or documentation requirements separately so the supplied configuration is clear.
The table describes one published model revision. Confirm the current supply configuration before ordering.
Before You Order
Use the GA PRO PLUS electrical limits as the starting point for system design. Confirm the AC supply where applicable, battery voltage, PV string limits and equipment connected to the output. Optional functions must be specified with the order.
Electrical Match
Check the battery and charging requirements for the selected GA PRO PLUS model. Match permitted charge and discharge current, charging profile and any supported BMS protocol. A matching connector or nominal voltage alone does not confirm compatibility. For a battery-free or DC-only product, use only the interfaces listed in its model table.
Installation Plan
Install the GA PRO PLUS product within the temperature, ventilation and enclosure conditions stated in its manual. Specify cable sizes, isolation and protection through a qualified installation design. Product dimensions and clearances should be checked before cabinet or mounting work.
Supply Configuration
GA PRO PLUS Series — Selection and Application
The GA PRO PLUS series belongs to the hybrid solar inverters range. Review the exact model in the specification table rather than selecting on the series name alone.
Lithium Battery Auto-restart Function, More Convenient for Lithium Battery Charging Intelligent Power Supply Mode, Intelligent Distribution of Solar Panel/Mains/Battery Power Shares
Model selection
For GA PRO PLUS, first identify the required electrical interface and continuous load.
Model | GA6248SMHB | GA8648SMHB | GA11048SMHB Nominal Voltage | 220/230/240VAC
Operating features
Lithium Battery Auto-restart Function, More Convenient for Lithium Battery Charging
Intelligent Power Supply Mode, Intelligent Distribution of Solar Panel/Mains/Battery Power Shares
Utility Charging Voltage/PV Charging Voltage Adjustable, Match Different Battery Charging Requirements
Slim Body, Convenient Installation And Transportation
Battery Reverse Connection Protection with Fuse Switch, Safer Installation
PF1.0, High Efficiency, Lower Consumption, Energy Conservation/Environmental Protection/Electricity Saving/Cost Saving
System integration
Use the GA PRO PLUS electrical limits as the starting point for system design. Confirm the AC supply where applicable, battery voltage, PV string limits and equipment connected to the output. Optional functions must be specified with the order.
Battery and charging
Check the battery and charging requirements for the selected GA PRO PLUS model. Match permitted charge and discharge current, charging profile and any supported BMS protocol. A matching connector or nominal voltage alone does not confirm compatibility. For a battery-free or DC-only product, use only the interfaces listed in its model table.
Installation planning
Install the GA PRO PLUS product within the temperature, ventilation and enclosure conditions stated in its manual. Specify cable sizes, isolation and protection through a qualified installation design. Product dimensions and clearances should be checked before cabinet or mounting work.
Monitoring and interfaces
Check which monitoring ports and communication options are included on the selected GA PRO PLUS model. Confirm accessory hardware, protocol and firmware before relying on remote monitoring, battery communication or expansion.
Frequently asked questions
Which GA PRO PLUS model should I choose? Start with the model table and the loads or battery system, then confirm the final configuration before ordering.
Are all optional functions included? No. Availability depends on the model, hardware and agreed supply specification.
Can I combine data from different catalogues? Use one matching model and revision. Confirm any differing values with the supplier.
Discuss your requirements
Contact Techfine Group with your GA PRO PLUS requirements. Include the model and the application so the electrical configuration and supporting documents can be checked.
