HG-B Series Grid-Tie Solar Inverter
HG-B Series Battery-Free Grid-Tie Solar Inverter 6.5-11 kW
Parameter | HG6500 | HG11000
Input wiring | L+N+PE
Rated input voltage | 220/230/240VAC
The HG-B series belongs to the grid-tie solar inverters range. Review the exact model in the specification table rather than selecting on the series name alone.
Parameter | HG6500 | HG11000 Input wiring | L+N+PE
Structural Features
Key features of the HG-B platform:
- Parameter | HG6500 | HG11000
- Input wiring | L+N+PE
- Rated input voltage | 220/230/240VAC
- Input voltage range | 90-280 VAC ±3 V (normal mode); 170-280 VAC ±3 V (UPS mode)
- Input frequency range | 50 / 60 Hz (auto-sensing)
Product Advantages
Parameter | HG6500 | HG11000
Input wiring | L+N+PE
Rated input voltage | 220/230/240VAC
Input voltage range | 90-280 VAC ±3 V (normal mode); 170-280 VAC ±3 V (UPS mode)
Input frequency range | 50 / 60 Hz (auto-sensing)
For a HG-B quotation, send the exact model, quantity, destination market, electrical requirements and expected operating duty. Identify any branding, packaging or documentation requirements separately so the supplied configuration is clear.
Technical Parameters
| Parameter | HG6500 | HG11000 |
|---|---|---|
| Input | ||
| Input wiring | L+N+PE | |
| Rated input voltage | 220/230/240VAC | |
| Input voltage range | 90-280 VAC ±3 V (normal mode); 170-280 VAC ±3 V (UPS mode) | |
| Input frequency range | 50 / 60 Hz (auto-sensing) | |
| Output | ||
| Rated power | 6500W | 11000W |
| Output voltage | 220/230/240VAC±5% | |
| Output frequency | 50/60Hz±0.1% | |
| Waveform | Pure sine wave | |
| Transfer time (selectable) | 10 ms (computer loads) / 20 ms (home appliances) | |
| Peak power | 13000VA | 22000VA |
| Overload capability | 11 s @ 105-150% load; 2 s @ 150-200% load; 400 ms @ >200% load | |
| Grid-tie operation | ||
| Output voltage | 220/230/240VAC | |
| Grid feed-in voltage range | 90-280VAC | |
| Grid feed-in frequency range | 49-51±1Hz/59-61±1Hz | |
| Rated output current | 35A | 50A |
| Power factor range | >0.99 | |
| Max. conversion efficiency (DC/AC) | 0.98 | |
| PV input | ||
| PV operating range | 70~500Vdc | |
| Max. PV input power | 9000W | 18000W |
| Optimal Vmp range | 300~400Vdc | |
| Max. PV input voltage | 500Vdc | |
| Max. PV input current | 15A+15A | 18A+18A |
| Display | ||
| LCD display | Shows operating mode / load / input / output, etc. | |
| Communication | ||
| RS232 | Baud rate 2400 | |
| Expansion slot | Wi-Fi card, CT monitoring, etc. | |
| Environment | ||
| Operating temperature | -10 to 50 °C | |
| Operating humidity | 20-95% (non-condensing) | |
| Storage temperature | -15 to 60 °C | |
| Altitude | <=1000 m without derating; derated above 1000 m, max. 4000 m (ref. IEC 62040) | |
| Noise level | ≤50 dB | |
| Physical | ||
| Dimensions L×W×H (mm) | 324×223×105 | |
Use the HG-B electrical limits as the starting point for system design. Confirm the AC supply where applicable, battery voltage, PV string limits and equipment connected to the output. Optional functions must be specified with the order.
Check the battery and charging requirements for the selected HG-B model. Match permitted charge and discharge current, charging profile and any supported BMS protocol. A matching connector or nominal voltage alone does not confirm compatibility. For a battery-free or DC-only product, use only the interfaces listed in its model table.
For a HG-B quotation, send the exact model, quantity, destination market, electrical requirements and expected operating duty. Identify any branding, packaging or documentation requirements separately so the supplied configuration is clear.
The table describes one published model revision. Confirm the current supply configuration before ordering.
Before You Order
Use the HG-B electrical limits as the starting point for system design. Confirm the AC supply where applicable, battery voltage, PV string limits and equipment connected to the output. Optional functions must be specified with the order.
Electrical Match
Check the battery and charging requirements for the selected HG-B model. Match permitted charge and discharge current, charging profile and any supported BMS protocol. A matching connector or nominal voltage alone does not confirm compatibility. For a battery-free or DC-only product, use only the interfaces listed in its model table.
Installation Plan
Install the HG-B product within the temperature, ventilation and enclosure conditions stated in its manual. Specify cable sizes, isolation and protection through a qualified installation design. Product dimensions and clearances should be checked before cabinet or mounting work.
Supply Configuration
HG-B Series — Selection and Application
The HG-B series belongs to the grid-tie solar inverters range. Review the exact model in the specification table rather than selecting on the series name alone.
Parameter | HG6500 | HG11000 Input wiring | L+N+PE
Model selection
For HG-B, first identify the required electrical interface and continuous load.
Parameter | HG6500 | HG11000 Input wiring | L+N+PE
Operating features
Parameter | HG6500 | HG11000
Input wiring | L+N+PE
Rated input voltage | 220/230/240VAC
Input voltage range | 90-280 VAC ±3 V (normal mode); 170-280 VAC ±3 V (UPS mode)
Input frequency range | 50 / 60 Hz (auto-sensing)
System integration
Use the HG-B electrical limits as the starting point for system design. Confirm the AC supply where applicable, battery voltage, PV string limits and equipment connected to the output. Optional functions must be specified with the order.
Battery and charging
Check the battery and charging requirements for the selected HG-B model. Match permitted charge and discharge current, charging profile and any supported BMS protocol. A matching connector or nominal voltage alone does not confirm compatibility. For a battery-free or DC-only product, use only the interfaces listed in its model table.
Installation planning
Install the HG-B product within the temperature, ventilation and enclosure conditions stated in its manual. Specify cable sizes, isolation and protection through a qualified installation design. Product dimensions and clearances should be checked before cabinet or mounting work.
Monitoring and interfaces
Check which monitoring ports and communication options are included on the selected HG-B model. Confirm accessory hardware, protocol and firmware before relying on remote monitoring, battery communication or expansion.
Frequently asked questions
Which HG-B model should I choose? Start with the model table and the loads or battery system, then confirm the final configuration before ordering.
Are all optional functions included? No. Availability depends on the model, hardware and agreed supply specification.
Can I combine data from different catalogues? Use one matching model and revision. Confirm any differing values with the supplier.
Discuss your requirements
Contact Techfine Group with your HG-B requirements. Include the model and the application so the electrical configuration and supporting documents can be checked.
